• HOME > News > how to calculate square feet of pipe

how to calculate square feet of pipe

Working Out the Area of Pipes

Flowing through a vast range of applications such as plumbing, ventilation, and irrigation, pipes are used to control the flow rate and pressure of whatever fluid they contain. At first glance, calculating the area of such a device may appear intimidating; however, with the right measurements and formulas, it is easy to calculate square feet of a pipe.

Charting the Outside Circumference

To calculate the total square feet of a pipeline, start by measuring the roundness of the exterior. Obtain this measurement using either a retractable measuring tape or a caliper. The outside diameter is size measured from one side of the tube to the other, encompassing the widest part of the pipe. It is important to make sure to measure at the widest point of the pipe, not including any additional fixtures such as protrusions or caps.

Establishing the Thickness of Walls

To figure out the wall thickness of a pipe, take the measure of the space between its inner and outer diameters. The size of this space impacts the area of the pipe, so it’s essential to be precise when gauging it. To make sure you get results you can trust, use a caliper or micrometer to take your measurement.

Determining the Cross-Sectional Measurements

After you have ascertained the external diameter and soundness of the pipe’s walls, you can compute its cross-sectional expanse using this formula:

The Fundamental Area of a Circle is Proportional to the Difference of its Diameters Squared

The cross-sectional area of a piping system is represented by the letter A, whereas the value of pi () is held at the standard 3.14159265359 and the outside diameter of the pipe is denoted with the letter D.

The internal diameter of the pipe is calculated by subtracting twice its wall thickness from the outer diameter (D).

Fourth Step: Square Footage to the Rescue!

The area of a pipe can be calculated by dividing the cross-sectional area by 144. That will give you the total square footage of the pipe.

Square Footage Calculations: Divide On-Hand Amount by One-Hundred and Forty-Four

Square foot measurement of a pipe’s cross-sectional area, A, is indicated by the Sq. Ft. title.

To understand the inner diameter of our example pipe with a 20 inch exterior and a 0.5 inch wall thickness, we need to first solve for it!

By taking into account a time period of 0.5, the resulting distance D is rendered to be 19 inches.

Subsequently, you can determine the area’s cross-section:

According to the formula A = /4 x (D^2 – d^2), the area of a circle with diameter 20 inches and a radius of 19 inches is equal to 23.56 sq in.

To conclude, it is simple to change the area to square feet:

The area of a space can be calculated by dividing it by 144, leading to 0.1633 square feet per single unit.

Knowing how to calculate the square footage of a pipe can be invaluable, especially when it comes to plumbing, engineering, and construction. With these straightforward steps, you can swiftly figure out a pipe’s area for any project calculations or design needs. As the saying goes – measure twice and cut (or calculate) once – so always double-check your values to guarantee accurate results.

Related Product


Warning: Use of undefined constant rand - assumed 'rand' (this will throw an Error in a future version of PHP) in /www/wwwroot/www.ytdrtube.com/wp-content/themes/msk5/single.php on line 77
  • Hot Dip Galvanized Square Steel Pipe HDG Tube

    Hot Dip Galvanized Square Steel Pipe HDG Tube

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Square Steel Pipe Carbon Steel Pipe

    Square Steel Pipe Carbon Steel Pipe

    Thickness 0.5- 60 mm Tolerance as required OD(outer diameter) square 10*10-1000*1000mm rectangular Brand YUANTAI DERUN Section Shape Square OR rectangular Length 3-12M according to […]

  • Pre Galvanzied Square Steel Tube

    Pre Galvanzied Square Steel Tube

    1.Introduction of pre-square tube Coiled pipes are pipes and pipes for processing technological processes, and are the name of general pipes, which are pipes made of long steel coi […]

  • Square Seamless Steel Pipe

    Square Seamless Steel Pipe

    Attribute parameters of seamless square steel tubes Thickness  3- 50 mm Tolerance  as required OD(outer diameter)  100*100-800*800 Brand  YUANTAI DERUN Section Shape  Square OR rec […]

  • EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    Yuantai Derun Steel Pipe Manufacturing Group is a steel pipe and steel enterprise that has operated for many years, mainly engaged in steel products such as black square and rectan […]

  • Square Hollow Section

    Square Hollow Section

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Black Rectangular Hollow Section

    Black Rectangular Hollow Section

    OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300*800 400*700 550*550 500*600 1.4 1.70 3.5-3.75 9 […]

  • Black Square Steel Tube

    Black Square Steel Tube

    SPECIFICATION TABLE OF BLACK SQUARE STEEL TUBE OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300* […]

  • Hot Dip Galvanized Rectangular Steel Tube

    Hot Dip Galvanized Rectangular Steel Tube

    Hot dip galvanized rectangular steel tube is a rectangularsquare tube that is welded after the steel plate or steel strip is curled and formed, and is formed after the square tube […]


  • Post time: 2023-06-07