• HOME > News > abs pipe fittings square

abs pipe fittings square

ABS pipes, constructed from acrylonitrile butadiene styrene plastics, have become the go-to choice for home and commercial building drainage, waste, and venting solutions. Unlike traditional PVC pipes, ABS pipes are much easier to install and offer increased durability.

ABS pipes interlock with specially designed fittings. An array of options are available, the most popular being elbow joints, tee joints, and wye joints. To secure the fit, an adhesive is spread on the inside of the pipes before they’re pushed together and left to set. Every component must remain still until the adhesive resolidifies for maximum strength.

To switch up direction, elbow joints are your go-to. And if you need to interlock two tubes, a tee joint will do the trick for a “T” shape. As for a “Y” configuration? Look no further than wye joints!

ABS fittings come in three additional varieties: crosses, couplings, and reducers. Crosses bring four pipes together in a crisscross formation, couplings link two pipes end-to-end, and reducers join two different-sized tubes.

ABS fittings range in size from 1/2 inch to 4 inches, with the most typical sizes being 1/2, 3/4, 1, 1-1/4, 1-1/2, and 2. Even larger fittings of 3 and 4 inches are available.

As you navigate through the process of installing ABS pipe, it is of the utmost importance to select the right size fitting. Too small of a fitting will not fit as designed and has the potential to come loose. If you make the mistake of using a fitting that is too large, it will be extremely difficult to push the ABS pipe all the way into the fitting, which could result in it breaking.

ABS pipe is securely joined together with solvent cement. This liquid adhesive is applied inside of the fitting, pushing the pipe into place. When complete, its drying process will form a sturdy bond between them. Together, the pipe and fitting will last for the long haul without worry of any potential detachment or misalignment.

ABS pipe can easily be shaped according to your needs; using either a saw or a pipe cutter will get the job done. A saw will offer a smoother edge, yet a pipe cutter is quicker and far simpler to use.

To snip ABS pipe with a saw, first identify the point where you want the cut and scribe it. Subsequently, sawing the pipe is just a matter of utilizing either a hacksaw or a reciprocating saw. All that said, precaution should be taken while piping to stay safe from the harsh contours of the ABS pipe.

To craft a neat cut in ABS pipes, begin by firmly squeezing a pipe cutter around the circumference of the pipe. Subsequently, roll the cutter in a circle around the pipe for an even cut.

After slicing the pipe, you can join the pieces using ABS fittings. For a secure fit, slather solvent cement on the inside of the fitting and embed the pipe. Compress them together and wait for the adhesive to dry.

When it comes to drainage, waste, and vent applications in residential and commercial buildings, ABS pipe is an outstanding option. As opposed to PVC pipe, ABS is relatively simple to install and boasts impressive durability – plus, it can be sliced with a saw or a cutter then fastened together with fittings crafted from the same material.

Related Product


Warning: Use of undefined constant rand - assumed 'rand' (this will throw an Error in a future version of PHP) in /www/wwwroot/www.ytdrtube.com/wp-content/themes/msk5/single.php on line 77
  • Hot Dip Galvanized Square Steel Pipe HDG Tube

    Hot Dip Galvanized Square Steel Pipe HDG Tube

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Black Square Steel Tube

    Black Square Steel Tube

    SPECIFICATION TABLE OF BLACK SQUARE STEEL TUBE OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300* […]

  • Hot Dip Galvanized Rectangular Hollow Section

    Hot Dip Galvanized Rectangular Hollow Section

    Iron and steel materials are indispensable resources in human life today. However, due to its own characteristics, “corrosion is accompanied by us every day and consumes our […]

  • Black Rectangular Hollow Section

    Black Rectangular Hollow Section

    OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300*800 400*700 550*550 500*600 1.4 1.70 3.5-3.75 9 […]

  • Hot Dip Galvanized Rectangular Steel Tube

    Hot Dip Galvanized Rectangular Steel Tube

    Hot dip galvanized rectangular steel tube is a rectangularsquare tube that is welded after the steel plate or steel strip is curled and formed, and is formed after the square tube […]

  • Square Seamless Steel Pipe

    Square Seamless Steel Pipe

    Attribute parameters of seamless square steel tubes Thickness  3- 50 mm Tolerance  as required OD(outer diameter)  100*100-800*800 Brand  YUANTAI DERUN Section Shape  Square OR rec […]

  • Square Steel Pipe Carbon Steel Pipe

    Square Steel Pipe Carbon Steel Pipe

    Thickness 0.5- 60 mm Tolerance as required OD(outer diameter) square 10*10-1000*1000mm rectangular Brand YUANTAI DERUN Section Shape Square OR rectangular Length 3-12M according to […]

  • EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    Yuantai Derun Steel Pipe Manufacturing Group is a steel pipe and steel enterprise that has operated for many years, mainly engaged in steel products such as black square and rectan […]

  • Pre Galvanzied Square Steel Tube

    Pre Galvanzied Square Steel Tube

    1.Introduction of pre-square tube Coiled pipes are pipes and pipes for processing technological processes, and are the name of general pipes, which are pipes made of long steel coi […]


  • Post time: 2023-07-04