• HOME > News > square tube dies for pipe bender

square tube dies for pipe bender

Metalworking shops rely on pipe benders to shape their pipes and tubes into countless unique shapes and curves. Square tube dies function as a specialized tool, engineered to evenly distribute force across the entirety of a square tube – making for a consistent, flawless curve each time.

Crafting circles, angles, and other bends in tubes of all sizes just got a whole lot easier! Square tube dies come in different sizes and shapes, crafted from hardy steel, aluminum, or brass. To pick the right die for your tubes, simply choose one that corresponds with their size – small tubes get small dies, big tubes get big dies. Then, pick a die that paired with the shape you desire as the final result. It’s that convenient!

It is essential to fasten the square tube die tightly and in the right position when bending tubes, as it prevents it from slipping throughout this process. A precise alignment of the die with the tube should also be verified, in order to ensure a uniform and precise bended outcome.

The application of an appropriate amount of pressure when utilizing square tube dies is paramount. An excess of force can lead to an uneven bend and potentially cause breakage, while insufficient pressure will result in a bend that is not quite up to par.

When navigating the tricky world of square tubes and bending, it is imperative to employ the correct approach. The act of bending should start from the middle and radiate outwards, thus guaranteeing a coherent bend. Additionally, one must apply a slow, consistent pressure when performing the bend. This cautionary step allows for avoidance of potential tube damage.

Square tube dies possess the remarkable ability to bend tubes into a selection of shapes and bends. These metal-working tools can turn an ordinary tube into a circle, U-shape, attractive angle, or even give it protruding and indentations characteristics. In short, they are made to manipulate tubes into the desired form.

Metalworking shops rely greatly on the use of durable square tube dies to make a variety of complex bends with precision. By strategically distributing pressure along the length of the tube, the dies ensure that the bender creates smooth curves and balanced angles. With the correct technique, these tools come in a range of sizes and shapes according to the project’s demands. While they are an essential part of any metalworker’s repertoire, it is equally important to know how to use them to their fullest potential.

Steel square tube dies form the basis of any efficient pipe bender – they are vital for perfecting the form of a variety of pipes, no matter their size or thickness. These dies are available in an array of sizes, granting flexibility for bending with precision.

When bending a pipe with a bender and dies, the first step is to identify an appropriate die size that fits the tube. Die selection is based on the diameter and wall thickness of the pipe. It is best to pick a die that is slightly bigger than the diameter of the pipe, to generate the most effective outcomes.

After selecting the correct die, the pipe is inserted into it to set up the bender. This machine will then be employed to bend the pipe, following the die’s pattern as a guide. Depending on the bender’s model, various steps need to be completed, such as fixing the pressure level, altering the speed setting, and calibrating the die’s position.

After bending the pipe, ensuring its bend is uniform and accurately formed is paramount. If the shape of the bend turns out to be less than satisfactory, it can be corrected by repeating the working procedure until it meets the desired specifications.

Utilizing the correct lube when curving tubes with squared dies is vital to guarantee all the dies move without any issues along the pipe. This not only decreases the amount of friction formed but stops the pipe from warping or taking on a distorted form in the course of the process.

Taking every measure of safety while working with a bender and square tube dies is a must. This entails wearing gloves, shielding your eyes, and mindfully checking to make sure that neither the pipe nor the die is caught while bending.

Working with a pipe bender requires that special square tube dies are incorporated, which permit bending pipes into diverse shapes and configurations. To carry out the task accurately, the right die must be selected and the bender should be properly set up. It is key to guarantee that the curvature created is consistent and just as it has been envisioned. Additionally, it is critical to observe safety protocol by making sure to use the correct lubricant when employing a bender fitted with square tube dies.

Related Product


Warning: Use of undefined constant rand - assumed 'rand' (this will throw an Error in a future version of PHP) in /www/wwwroot/www.ytdrtube.com/wp-content/themes/msk5/single.php on line 77
  • Square Seamless Steel Pipe

    Square Seamless Steel Pipe

    Attribute parameters of seamless square steel tubes Thickness  3- 50 mm Tolerance  as required OD(outer diameter)  100*100-800*800 Brand  YUANTAI DERUN Section Shape  Square OR rec […]

  • Hot Dip Galvanized Rectangular Hollow Section

    Hot Dip Galvanized Rectangular Hollow Section

    Iron and steel materials are indispensable resources in human life today. However, due to its own characteristics, “corrosion is accompanied by us every day and consumes our […]

  • Square Steel Pipe Carbon Steel Pipe

    Square Steel Pipe Carbon Steel Pipe

    Thickness 0.5- 60 mm Tolerance as required OD(outer diameter) square 10*10-1000*1000mm rectangular Brand YUANTAI DERUN Section Shape Square OR rectangular Length 3-12M according to […]

  • Pre Galvanzied Square Steel Tube

    Pre Galvanzied Square Steel Tube

    1.Introduction of pre-square tube Coiled pipes are pipes and pipes for processing technological processes, and are the name of general pipes, which are pipes made of long steel coi […]

  • Hot Dip Galvanized Square Steel Pipe HDG Tube

    Hot Dip Galvanized Square Steel Pipe HDG Tube

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Square Hollow Section

    Square Hollow Section

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    Yuantai Derun Steel Pipe Manufacturing Group is a steel pipe and steel enterprise that has operated for many years, mainly engaged in steel products such as black square and rectan […]

  • Black Square Steel Tube

    Black Square Steel Tube

    SPECIFICATION TABLE OF BLACK SQUARE STEEL TUBE OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300* […]

  • Black Rectangular Hollow Section

    Black Rectangular Hollow Section

    OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300*800 400*700 550*550 500*600 1.4 1.70 3.5-3.75 9 […]


  • Post time: 2023-07-26