• HOME > News > square steel pipe with holes

square steel pipe with holes

Steel pipes are regularly pierced with holes at distinct intervals to facilitate the passage of water or other liquids. Round openings are typically used, although square and rectangle holes may be incorporated into the design. Whether the puncturing commences before or after the pipes are fused together depends on the purpose.

Steel pipes are punctuated with holes for various reasons, the main being the passage of water or other liquids. Whether the holes are cut before or after welding depends on their intended use.

Steel pipes are sometimes fitted with ports to allow air to flow through them. This is commonly required in applications related to climate control, such as for air conditioning purposes.

When sending light through steel pipes, gaps can be created to allow the light to travel smoothly. This is often seen in fiber optics, where the pipes enable light to journey with effortless ease.

Last, but not least, steel pipes can be methodically perforated to create gaps for electrical cables to pass through. This technique is often applied in areas where the pipes are used to supply electrical energy, such as in power lines.

Consider these three criteria before diving into steel pipe hole-cutting: Cut type, size, and location. The saw chosen must match the desired cut type; size must match the application’s requirements; and the hole’s location must be carefully plotted to avoid jeopardizing the pipe’s strength.

Once the opening is cut from its material, the consequence may be sharp edges that could be hazardous and result in possibly hurtful consequences. To prevent this, it is highly advisable to take a file or grinder to the edges of the gap, creating a smoother surface that will be less inclined to cause harm.

A wide range of projects require steel pipes with holes cut into them. Whether they are welded together before or after the openings are made, these openings are usually meant to allow water, fluids, air, light, or even electrical cables to pass through. Cutouts of this kind can be used for a multitude of applications.

Related Product


Warning: Use of undefined constant rand - assumed 'rand' (this will throw an Error in a future version of PHP) in /www/wwwroot/www.ytdrtube.com/wp-content/themes/msk5/single.php on line 77
  • Square Seamless Steel Pipe

    Square Seamless Steel Pipe

    Attribute parameters of seamless square steel tubes Thickness  3- 50 mm Tolerance  as required OD(outer diameter)  100*100-800*800 Brand  YUANTAI DERUN Section Shape  Square OR rec […]

  • Black Rectangular Hollow Section

    Black Rectangular Hollow Section

    OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300*800 400*700 550*550 500*600 1.4 1.70 3.5-3.75 9 […]

  • Black Square Steel Tube

    Black Square Steel Tube

    SPECIFICATION TABLE OF BLACK SQUARE STEEL TUBE OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300* […]

  • Square Hollow Section

    Square Hollow Section

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Hot Dip Galvanized Square Steel Pipe HDG Tube

    Hot Dip Galvanized Square Steel Pipe HDG Tube

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Hot Dip Galvanized Rectangular Steel Tube

    Hot Dip Galvanized Rectangular Steel Tube

    Hot dip galvanized rectangular steel tube is a rectangularsquare tube that is welded after the steel plate or steel strip is curled and formed, and is formed after the square tube […]

  • Square Steel Pipe Carbon Steel Pipe

    Square Steel Pipe Carbon Steel Pipe

    Thickness 0.5- 60 mm Tolerance as required OD(outer diameter) square 10*10-1000*1000mm rectangular Brand YUANTAI DERUN Section Shape Square OR rectangular Length 3-12M according to […]

  • EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    Yuantai Derun Steel Pipe Manufacturing Group is a steel pipe and steel enterprise that has operated for many years, mainly engaged in steel products such as black square and rectan […]

  • Pre Galvanzied Square Steel Tube

    Pre Galvanzied Square Steel Tube

    1.Introduction of pre-square tube Coiled pipes are pipes and pipes for processing technological processes, and are the name of general pipes, which are pipes made of long steel coi […]


  • Post time: 2023-06-15