• HOME > News > square rainwater pipe dimensions

square rainwater pipe dimensions

All You Require to Be Informed of Square Rainwater Pipe Dimensions

Every building needs pipe drainage for the water from the roof, to ensure the safety of the structures foundations.In this article, we are exploring further information about square rainwater pipes as an integral part of every roof’s drainage system – everything from the dimensions to specifics about their use.

Unlocking the Mystery of Square Rainwater Pipes

When the rain comes pouring down, the square shaped rainwater pipes are there to catch it and guide it away. Whether made of plastic or metal, these narrow conduits come in various sizing options – calibrated to the size of the building as well as the amount of rain seen in that particular area. By set up vertically on the faade of a building, these pipes allow for rainwater to stream downwards into the drainage system.

Dimensions of Square Rainwater Pipes

Depending on the size of the construction project and the typical amount of precipitation in the area, a variety of square rainwater pipe sizes can be employed to fulfill their designated purpose. To help understand which size is best suited for various buildings, the following showcases a selection of the most commonly used pipe diameters and their corresponding measurements:

For those with limited space or a need to manage moderate amounts of precipitation, the 50mm square rainwater pipe is the perfect choice. This product is available in 1-meter segments and measures 50mm by 50mm in size.

When it comes to rainwater drainage, 65mm Square Rainwater Pipe offers the size and strength to suit your substantial needs. This size has been designed with residential and smaller business buildings in mind and provides an ideal alternative for sites that experience moderate levels of rainfall. It is available in segments of two meters, each measuring 65mm in length by 65mm in height.

If your building or area is subject to a hefty dose of rainfall, the 75mm x 75mm Square Rainwater Pipe could be a viable solution. Crafted from sturdy materials and ranging from 3-meter lengths, this type of pipe is renowned for its ability to withstand the challenges of torrential showers.

Offering an impressive rainwater storage capacity, the 100mm Square Rainwater Pipe is the largest in size currently available. This pipe is particularly suitable for commercial buildings located in regions with consistently heavy rainfall. It is composed of dimensions measuring 100mm x 100mm, and its typical length is 3-meters.

Weighing the Alternatives: Finding the Perfect Square Rainwater Pipe

Establishing an effective and efficient drainage system in a building requires careful deliberation when selecting the right square rainwater pipes. For this, there are several elements to factor in, such as:

The magnitude of the construction will dictate the breadth of rainwater conduits essential.

Rainfall in this region can widely fluctuate, which will ultimately dictate how much capacity should be available in the area’s rainwater pipes.

Various materials are available when it comes to square rainwater pipes, offering different advantages depending on the building’s location and financial situation. PVC, galvanized steel, copper, and aluminum are among the options to select from.

The hued tubes of rainfall conjuring an aesthetical aura will have an inevitable impact on the construction’s alluring demeanour.

Ensuring Successful Integration of Square Rainwater Piping

Expertise and exactitude are key when installing square rainwater systems so that rainfall is accurately led off from the building’s footing. Here is a short collection of useful hints to put in practice when setting up square rainwater pipes:

To guarantee their vertical alignment, you can use either lasers or levels when mounting the pipes.

Secure the tubes through the utilization of brackets or clips for stability.

Connectors compatible with the work should be employed at all junctions to guard against the risk of leakage.

It is critical that the pipes are installed in a way that allows for a gradual incline downwards towards the drainage system, which will help prevent pockets of stagnant water from standing.

From home-ownership to commercial businesses, roofs rely on square rainwater pipes to a great extent. To benefit from a seamless and efficient drainage system, it is important to pay attention to factors such as size and material. Rather than learn through trial and error, it is wise to seek professional guidance on this matter. On top of offering expert advice, they may avoid the hazards of an inadequate roof drainage system.

Related Product


Warning: Use of undefined constant rand - assumed 'rand' (this will throw an Error in a future version of PHP) in /www/wwwroot/www.ytdrtube.com/wp-content/themes/msk5/single.php on line 77
  • Black Rectangular Hollow Section

    Black Rectangular Hollow Section

    OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300*800 400*700 550*550 500*600 1.4 1.70 3.5-3.75 9 […]

  • Black Square Steel Tube

    Black Square Steel Tube

    SPECIFICATION TABLE OF BLACK SQUARE STEEL TUBE OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) OD(MM) THICKNESS(MM) 20*20 1.3 60*120 80*100 90*90 1.50 180*180 3 300* […]

  • Hot Dip Galvanized Rectangular Steel Tube

    Hot Dip Galvanized Rectangular Steel Tube

    Hot dip galvanized rectangular steel tube is a rectangularsquare tube that is welded after the steel plate or steel strip is curled and formed, and is formed after the square tube […]

  • EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    EN10210 EN10219 Black Carbon Steel Welded Square Pipe

    Yuantai Derun Steel Pipe Manufacturing Group is a steel pipe and steel enterprise that has operated for many years, mainly engaged in steel products such as black square and rectan […]

  • Square Steel Pipe Carbon Steel Pipe

    Square Steel Pipe Carbon Steel Pipe

    Thickness 0.5- 60 mm Tolerance as required OD(outer diameter) square 10*10-1000*1000mm rectangular Brand YUANTAI DERUN Section Shape Square OR rectangular Length 3-12M according to […]

  • Square Seamless Steel Pipe

    Square Seamless Steel Pipe

    Attribute parameters of seamless square steel tubes Thickness  3- 50 mm Tolerance  as required OD(outer diameter)  100*100-800*800 Brand  YUANTAI DERUN Section Shape  Square OR rec […]

  • Square Hollow Section

    Square Hollow Section

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]

  • Hot Dip Galvanized Rectangular Hollow Section

    Hot Dip Galvanized Rectangular Hollow Section

    Iron and steel materials are indispensable resources in human life today. However, due to its own characteristics, “corrosion is accompanied by us every day and consumes our […]

  • Hot Dip Galvanized Square Steel Pipe HDG Tube

    Hot Dip Galvanized Square Steel Pipe HDG Tube

    Thickness: 0.5- 60 mm OD(outer diameter): square 10*10-1000*1000mm rectangular:10*15-800*1100mm Section Shape: Square OR rectangular Place of Origin: Tianjin, China Application Str […]


  • Post time: 2023-06-02